THE COMPONENTS OF THE COMPLETE THUNDER CLIP-ON SOLUTION
1. Thunder thermal scope model
2. Adapter ring – depending on the size of the scope it is going to be fitted on.
3. Eye-piece – this is needed of the client want to use the clip-on as a handheld when
its not fitted to a telescope (HM-THUNDER-E)
4. No rail needed as the client will be using the scope as a clip-on to an existing
telescope.
UNDERSTANDING THE ADAPTER RING:
Below are the different adapter mounts that fit over the day telescope’s front end or bell. It is
important that know that the adapter should easily go over the front end and that there
should be space for the rubber thread spacer to go around the front end of the telescope to
protect it from the clip-on.
HIKMICRO Thunder Clip-On Adaptors (V1):
HM-THUNDER-38A HIKMICRO Thunder Clip-On Adapter. This is the eyepiece used to convert the HIKMICRO
Thunder from a dedicated scope to a Clip-On unit. Suitable for 38-43mm diameter scope
ARH-44 Rusan One-piece Clip-On Adapter - 44mm. HIKMICRO Thunder compatible. Fits scope objectivebells W/44mm outside diameter.
HM-THUNDER-40A HIKMICRO Thunder Clip-On Adapter. This is the eyepiece used to convert the HIKMICRO
Thunder from a dedicated scope to a Clip-On unit. Suitable for 47-51mm diameter scope.
HM-THUNDER-50A HIKMICRO Thunder Clip-On Adapter. This is the eyepiece used to convert the HIKMICRO
Thunder from a dedicated scope to a Clip-On unit. Suitable for 55-59mm diameter scope
HM-THUNDER-60A HIKMICRO Thunder Clip-On Adapter. This is the eyepiece used to convert the HIKMICRO
Thunder from a dedicated scope to a Clip-On unit. Suitable for 62-66mm diameter scope
HM-THUNDER-62A HIKMICRO Thunder Clip-On Adapter. This is the eyepiece used to convert the HIKMICRO
Thunder from a dedicated scope to a Clip-On unit. Suitable for 61-68mm diameter scope
LIMITATIONS OF THE CLIP-ON SCOPE
Base magnification limitation of day scope to be used:
The scope that is being used with the THUNDER clip-on can not have a base magnification
bigger that x4. This is the smallest magnification in the specifications of the scope. This
means that a scope with the following magnification won’t work: 5-25x50 as x5 is the
smallest magnification but unfortunately bigger than x4.
Magnification of THUNDER clip-on scope:
Once the clip-on is mounted the magnet inside the adapter ring will activate the clip-on mode
of the Thunder scope. Once the clip-on is activated the digital magnification of the Thunder
reverts from x8 to x1 – thus maximum magnification in clip-on mode of x1. Once the
clip-on is removed the Thunder scope will change back to x8 digital zoom in the handheld or
full scope mode.
Key Features
- 256 × 192 thermal resolution, high sensitivity detector, NETD less than 35 mk (25 °C, F#=1.0)
- Image processing technology: Adaptive AGC, DDE, 3D DNR
- 1024 × 768 resolution 9.901 mm OLED display
- Supports distance measurement, and hotspot function
- Supports video recording and snapshot, built-in EMMC (16 GB)
- Up to 4.5 hours continuous working
Technical Specifications
Thermal Module
- Image Sensor: Uncooled Focal Plane Arrays
- Pixel Interval: 12 μm
- Resolution: 256 × 192
- Response Waveband: 8 μm to 14 μm
- NETD: Less than 35 mk (25 °C, F#=1.0)
- Lens (Focal Length): 19 mm
- IFOV: 0.63 mrad
- Field of View: 9.24°× 6.94°
- F Number: F1.0
- Frame Rate: 25 Hz
- Min Focusing Distance: 1 m
- Magnification: 1X
Image Display
- Monitor: 9.901 mm, OLED, 1024 × 768
- Palettes: Black hot, white hot, red hot, fusion
- Exit Pupil: 22 mm
- Eye Relief: 10 mm
System
- Hotspot: Yes
- Distance Measurement: Yes
- Standby mode: Yes
- Video Recording: Yes
- Picture Snapshot: Yes
- DPC: Yes
- PIP: Yes
- Uniformity Correction: Auto, Manual, External Correction
- Storage: Built-in EMMC (16 GB)
Power Supply
- Battery:
- Replaceable
- Applicable type: CR123A, RCR123A
- Battery Operating Time: 4.5 h (25 °C, with hotspot off)
- Anti-reverse battery connection: Yes
- Overvoltage Protection: Yes
- Battery Capacity Display: Yes
- Type-C Power Supply:
- 5 VDC, 2 A
- Supports external power suppl
General
- Port: Type-C
- Working Temperature: -20 °C to 55 °C
- Protection Level: IPX7
- Shock Absorption Design: Yes
- Vibration & Shock: 750 g/1 ms
- Transfer Ring Type: 50-59 mm
- Dimension (L × W × H): 153.2 mm × 62.5 mm × 59.2 mm
- Weight: 419 g without eyepiece and batteries
Image Disclaimer: Images are intended for illustrative purposes only and do not form part of any contract or warranty as to what you are purchasing. This transaction/purchase is subject to the confirmation of price and product by Karoo Outdoor Company (Pty) Ltd. See full Terms and Conditions.